How to Save Money on Multifamily Utilities
There’s no doubt that owning multifamily rental properties is one of the fastest ways to build wealth because when you have more tenants to collect rent from, you have the ability to generate a bigger income.
Sadly, owning a townhome or apartment building can be expensive but the good news is that there are ways to save money on utilities especially if you follow these tips.
1. Lease or Rental Agreement
First, make sure the lease is set up for tenants to pay any utility that isn’t shared. This includes water, heat, electric, trash, etc. A signed lease that’s not written in a way that clearly specifies the tenant is responsible for utilities can be a very expensive mistake.
We have seen many examples where an investor meant to bill tenants for utilities but forgot to include it in the lease. This error could easily cost the owner $2,000 over the course of the year. If you inherit a lease that does not include tenants paying for utilities, get the tenant a new lease with new utility terms as soon as the old lease has expired.
2. Electric Bill
Typically, electric can be put in the tenant’s name and billed directly to him or her. However, the tenant still needs to make sure they set up the electric in their name when they move into the apartment or house.
You may have electric in your name to make sure heat is on in the winter or to show the house well. The rule of thumb is to ask to see the electric account in the tenant’s name prior to move-in. If for some reason electric was not in tenant’s name for a month, you can still bill the tenant, assuming your lease is set up properly.
Be careful that tenants don’t turn off electric during their lease with the electric defaulting back into your name. This can especially come up when tenants have stopped paying rent and are in the eviction process.
3. Water Usage
Keep an eye on any water bill that is higher than normal for multi-unit buildings with a shared water bill. As a quick check, we look to see if the water bill is higher than the last water bill received. Water bills can be monthly, quarterly, or any other time span the municipality picks. So, it’s very tricky to tell if the water is high by JUST looking at the number.
If the water bill is higher than normal, we immediately put in a work order for our maintenance guy. We have him do a walk-through to ensure toilets aren’t running continuously and to look for any other water leaks. While this again sounds pretty basic, we have found that you can save thousands for multifamily complexes by checking water usage.
4. Eco-friendly Appliances
If you are seeing water bills higher than what you expect, an additional way to save money is to change out the toilets and showerheads to more eco-friendly versions. We have seen a 15 percent savings on average water usage by making these changes, obviously with variance depending on the situation.
To avoid breaking the bank, make the change during an apartment turn. In general, we try to keep major work when units are already vacant.
5. Gas vs. Oil vs. Electric Heat
I saw a wholesaler pitch their deal for a 6-unit building at a meetup, and he didn’t know the type of heat for the property. Attention all investors, agents, and wholesalers: The type of heat matters!
Oil heat can be twice as expensive as gas heat! And it matters even more if the heat is separate meters or one common meter. Obviously, investors prefer separate meters, but it can be expensive to separate them if they are not set up that way currently.
When meters aren’t separated, we typically will bill the tenant a set monthly fee for utilities. The utility fee includes anything that’s shared. This is helpful because it enables the rent to be advertised at a lower rate, as opposed to bundling the free heat cost in with the rent.
Make sure the lease is written in a way that clearly explains how the tenant will be billed each month.
6. Sub-Metering Water
Many multi-unit apartment complexes have one common water meter. This causes issues in terms of billing a tenant directly for water. While there are workarounds such as RUBS (Ratio Utility Billing System), there are some major drawbacks.
Many local courts (but not all) will not accept RUBS as a fair form of billing. Judges do not like that there is not a one-to-one ratio of a utility bill to tenant usage. The other issue is tenants are not as economical in their usage since their bill is not directly related to their usage.
So, what do you do if you have a common water meter for a multi-unit building? Depending on the setup of the building, it can be a lot cheaper than you’d think to break out separate water usage and bills for each tenant via sub-metering. Typically, tenants pay the monthly admin fee directly. Then, the only major cost is the initial plumbing work and the cost of the sub-meters.
We view sub-metering as a form of improvement/investment in the building. It will pay for itself over the years. But more importantly, it will dramatically increase the value of the property. When you go to sell or refinance, properties are valued off a multiple of the cap rate. The cap rate includes water usage, which will be basically zero after sub-metering.
7. Trash Removal
In many cities, you can get a private trash hauler to take away the trash. We have found you can save a significant amount of money by shopping around for this service, so don’t just use the first place that you contact!
Make sure that you check to ensure the city is OK with shopping trash haulers. Some cities have city-mandated trash services that you must use.
Contact RPM Central Valley
To learn more about which dog breeds that you should allow, or to speak with us about our property management services, contact us today by calling (209) 572-2222 or click here to connect with us online.